When installing hot-dip galvanized steel grating, large gaps should not be left to prevent unnecessary misunderstandings caused by falling objects. The distance between the horizontal bars of hot-dip galvanized steel grating should be less than 3.5 cm, and the distance below should be controlled within 2 cm. To maintain surface flatness, the error between hot-dip galvanized steel gratings should be less than four millimeters.
Hot dip galvanized steel grating should be reinforced by welding to maintain its strength. When the requirements are higher, the installation clips of the hot-dip galvanized steel grating can be used for fixation, and the number and installation method should meet the relevant regulations.
The load capacity of hot-dip galvanized steel grating should be consistent with the requirements of the project, and suitable loads should be selected according to actual requirements.
The dimensions of hot-dip galvanized steel grating platforms and channels must meet relevant standards. The width of a single person passage made of hot-dip galvanized steel grating should be at least 60 centimeters. If someone passes by at the same time, it should be widened by double. The channel of hot-dip galvanized steel grating should be at least 120 centimeters.
